- Complete kit for both left and right hand side, includes new ball joints (not assembled), OE style rubber frame bushings (installed), and washers
- Has 3 degrees of caster built in, no adjustability or settings required
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2") wall thickness, and powder coated black
- Works for any lift height of 1.5" or more. Any height less than that, a proper wheel alignment may not be able to be achieved
- Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
--
Dobinsons front upper control arm set. This will ONLY work on a vehicle lifted 1.5" or more, due to the built-in 3 degrees of caster. This will fit 100 Series Land Cruiser 1998-2007 NOTE: The ball joints are not installed, and must be installed by a professional using a heavy duty press. A hand press will not be strong enough. Dobinsons offers this service for an additional labor charge prior to shipping. These will be noise-free as they use rubber bushings and a factory style ball joint. No greasing is necessary.